AVProEdge AC-MX88-UHD-GEN2, User Manual

Page: 14 / 28

RS-232 and TCP/IP Commands:
The AC-MX88-UHD-GEN2 can be controlled with either RS-232 or TCP/IP commands. Certain switching or format
configurations can only be done using these commands. We recommend using either the MyUART (RS-232 - free) or
Hercules (TCP/IP - free) apps as they are very easy to use for sending commands to the machine.
For TCP/IP control commands use Telnet Port 23.
For RS-232, use a null modem serial cable adapter and set the serial communications to: 57600,n,8,1 (baud: 57600,
no parity, 8 data bits and 1 stop bit) with no handshaking.
Please add a return (Enter key) after each command when using direct commands.
The unified command list (ASCII) is listed below.
AC-MX88-UHD-GEN2
Page 14