Note1
: EDID Copy mode: EDID will be copied from sink on OUTPUT 1. The
AC-DA14-AUHD is set this way by default for maximum “Plug & Play” Compatibility.
If you change sink (Display) plugged into OUTPUT 1, please follow the steps below if
you wish to use the new sink’s EDID.
1.
Start with power off
2.
Set DIP to ‘00000’ (all up).
3.
Power on the unit
4.
Power on the source device and connect the HDMI input port.
Note2
: Cascading mode (Ideal for larger installations) Cascade mode does not react
to the EDID from the sink device. It sends the signal that you put in, out. This is
ideal for linking multiple units together. The method below is an ideal way to use
this function effectively.
To use cascading mode:
1.
Start with power off
2.
Fix an EDID on the FIRST unit in the series from the list above (4K60,
4K30, 1080P, etc…)
3.
Set the DIP on all subsequent units to “11111” (all down).
4.
Connect the source device
5.
Power up the system
AC-DA1
4
-AUHD
pg.
5
AVProConnect ~ 3518 N Casco Ave. Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~
pg.
5
AVProConnect ~ 3518 N Casco Ave. Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~
pg.
5
AVProConnect ~ 3518 N Casco Ave. Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~
pg.
5
AVProConnect ~ 3518 N Casco Ave. Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~
pg.
5
AVProConnect ~ 3518 N Casco Ave. Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~
pg.
5
AVProConnect ~ 3518 N Casco Ave. Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~
pg.
10
AVProEdge
~
2222 E 52nd Street N
Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~
