9
AC-
EX70
-UHD
■
IR Configuration
IR can be used in 3 ways:
1.
From Rack:
Use an IR
Sensor
on the AC-EX70-UHD Transmitter (IR
In Port) to send IR Signals to the remote end (Receiver) and come
out of
the
IR
Out Port with an emitter.
2.
From Remote End:
Use and IR Sensor on the AC-EX70-UHD
Receiver (IR In Port) and sen IR Signals BACK to the rack and come
out of the TRANSMITTER IR Out Port with an emitter.
3.
Control System Direct:
Plug an MONO 3.5mm cable into an emitter
port of any control system directly into the "I-PASS" Port on the AC-
EX70-UHD Transmitter to send pass IR Signals directly to the remote
end.
■
RS-232
Configuration
