1
1
AC-
EX
100
-UHD
■
IR Configuration
IR can be used in
2
ways:
1.
From Rack (Control System Direct):
Plug a MONO 3.5mm cable
into an emitter port of any control system directly into the "I-
PASS" (IR RX) Port on the AC-EX100-UHD Transmitter to send pass IR
Signals directly to the remote end.
2.
From Remote End:
Use and IR Sensor on the AC-EX70-UHD
Receiver (IR In Port) and sen
d
IR Signals BACK to the rack and come
out of the TRANSMITTER IR Out Port with an emitter.
*There is a 3-20v protection circuit built into the AC-EX100-UHD-T
Transmitter to safely plug IR signals directly into it for pass through to
the remote end.
