The
AVS-MIDI-1
MIDI to CV
Converter
User Guide
Thank you for purchasing from AvonSynth
Congratulations on your purchase of a brand new AvonSynth AVS-MIDI-1
MIDI to CV Converter Module. We trust that it will both serve and
inspire you as you create beautiful music with it for years to come.
In order to get the most out of your module, please ensure that you read
this User Guide in its entirety so that you fully understand all of its
functionality, and that you follow all necessary safety directions during use.
Included in the Box
Page 1 of 7
1 x MIDI to CV Module
1 x 16 pin to 16 pin
fl
at-cable power cord
4 x M3 Mounting Screws
4 x Nylon Washers
Installation
Step 1: Power your system o
ff
. Place the module in your Eurorack-
compatible rack in any convenient position. A
ffi
x the module to your
rails using the included mounting screws and nylon washers. Neglecting
to use these washers may result in unnecessary marking of the unit.
Step 2: Triple check the polarity of the power connector before
connecting the power cord to your power supply. Ensure that the -12v
line marked on the back of the module connects to the same end of the
fl
at-cable that also connects to the -12v line on your power supply. While
AvonSynth modules use shrouded connectors that make this process
safer and more reliable, some systems do not conform to this polarity
standard, so careful checking is
always
necessary. Connecting the
module with incorrect polarity can result in irreversible damage done to
the module which cannot be covered by warranty.
Step 3: Power up your system and start patching!
www.AvonSynth.com