www.avonic.eu
16
7. SETUP
Move the cursor to the Setup item in the main menu and press [home] button, SETUP menu
appears, as shown in the following figure.
Language: menu language, Optional items: EN, Chinese, Russian
DVI Mode, Optional items: DVI, HDMI
Protocol: Control protocol type. Optional items: AUTO, VISCA, PELCO-D, PELCO-P
V_Address: Protocol address, To be decided according to the agreement, AUTO, VISCA
protocol Optional items: 1 ~ 7
P_D_Address: PELCO-D protocol Optionalitems: 0 ~ 254
P_P_Address: PELCO-P protocol Optionalitems: 0 ~ 31
V_AddrFix: If I can change through the serial port of infrared switch, Optional items: On, Off
（
When set to On, useless in 88 30 01 FF
Command
）
Net Mode: Set the serial port control networking, Optional items: Serial, Paral
Baudrate: Serial port baud rate. Optional items: 2400, 4800, 9600
8. RESTORE DEFAULT
Move the cursor to the Restore Default item in the main menu and press [home] button,
RESTORE DEFAULT menu appears, as shown in the following figure.
SETUP
Language
EN
DVI Mode
DVI
Protocol
VISCA
V_Address
1
V_AddrFix
Off
Net Mode
Serial
Baudrate
9600
Select Item
Change Value
[Menu] Back
