www.avonic.eu
24
1.
Lan Settings
Default the IP address is 192.168.100.99, The MAC address can be modified.
2.
Port Settings
a.
HTTP Port IP address identifies the network device, the device can run multiple web
applications, each network program using network port to transmit data, so data
transmission to be carried out between the port and port. Port setting is to set up WEB
SERVER program using which port to transmit. When port mapping, need to be consistent
with the port number(default port: 80)
b.
RTSP Port Network camera support RTSP protocol, use the VLC tools broadcast.
c.
PTZ Port Support PTZ protocol, default port: 5678.
3.
Control Protocol Setting
Setting camera control communication protocol, include Visca address, Pelco-D address,
Pelco-P address.
4.
RTMP Setting
Setting the camera stream, can set up two stream, in the two stream selection control code
stream of "On", "Off", "Video", "Audio", etc.
5.
RTSP Setting
Setting network camera RTSP protocol of "On", "Off".
6.
ONVIF Setting
Setting the ONVIF protocol and ONVIF authorization "On", "Off".
7.
Multicast Setting
Setting multicast "On", "Off", and multicast address(default address 224.1.2.3) and
