Avol AXB610, User Manual, Page: 6 / 50

User's Guide ... 5
3. Notice
ThisSectionisforyoursafetyandproperuseoftheProducttopreventsafety
accidents/risks.Themanufacturershallnotberesponsiblefortroublescaused
byuseoftheProductinviolationoftheinstructions.
If the Product is wet, do not place it in the
heater or in the microwave oven to dry.
It may cause explosion, deformation or
product failure which is not covered under the
warranty.
Do not use chemicals (such as benzene,
thinner, alcohol) or detergent to clean the
Product.
It may cause fire..
Do not alter or impact on the Product.
Unauthorized alteration or product damage
by impact shall not be covered under the
warranty..
Do not install or operate the Product while
driving.
Operation of the Product while driving can
cause accidents. Pull over to a safe spot to
operate the Product..
Warning.
# Ignoring this warning could cause serious injury or even death
Caution.
# gnoring this caution could cause injury or damage to property
If the Product is directly connected to
the car, do not use the product for an
extensive period of time.
It may discharge the battery.
Install the Product in unaffected area by
the Navigation or Hipass device or ETC(E-
Tools).
Reflections of images of Navigation or Hipass
device or ETC(E-Tools) may cause poor
recording quality.
Make sure that the double-side adhesive
tape is firmly affixed during installation.
The Product may show poor performance by
over time moving or motor vibration.
Keep the windshield clean.
Foreign materials may prevent normal
recording of images..
Take extra care during installation of the
external camera.
Color of the coating on the rear(Option)
windshield may impair the recording quality.
Watch out for using memory cards and
removing it.
Uncertified Micro SD card may not be
recorded properly.
Please remove the power cable before
inserting or removing the SD Card
Back up files periodically.
When the SD Card is full, the oldest file in
the Card will be overwritten by a new file.
Please back up data periodically to prevent
unwanted data loss.
Please do not use sharp devices on the
LCD.
The touch panel or LCD may be damaged
by sharp devices when the black box is set
up with them on the LCD.