AVOCOR AVE Series, User Manual

Page: 20 / 36

AVE-Series User Manual | 20
Selecting the Source
You can access a number of sources on the Avocor AVE displays including, HDMI,
DisplayPort, & OPS.
The Source button is located on the Connect & Control Bar or on the Remote Control.
Once the menu has been selected, you will see the option to select the source you
require.
HDMI 1, HDMI 2, HDMI 3, DisplayPort, OPS, & Front HDMI
If there is no active signal from the chosen source, the screen will display the following
message: “No Signal”.
Connecting the Display
Proceed as follows to connect the display to your video sources, external controller.
When connecting your equipment:
1.
Turn off all equipment before making any connections.
2. Use the correct signal cables for each source.
3. For best performance and to minimise cable clutter, use high-quality cables that are
only as long as necessary to connect two devices. (Don't use a cable longer than 5
meters).
4. Ensure that the cables are securely connected.