Ft
Ft
VERTECH II
SKI AND ALPIN
SKI FEATURES
• Records vertical feet skied
• Counts number of runs skied
• Maximum, current, and average rate of descent
ALPIN FEATURES
• Aircraft precision altimeter shows altitude to 5 feet
• Records vertical feet hiked or climbed
• Sea level barometer with trend and thermometer
Made in Silicon Valley, California, USA
OPERATION AND SETUP
OPERATION
FUNCTIONS AND OPTIONS.
The flowchart below shows
the way that the Vertech II displays information and the effect of
pressing the Function and Option Buttons in different functions.
FUNCTIONS.
Press the Function Button to move between the 4
primary functions Altitude/Time (A), Vertical Sports (B), Weather
(C), and Stopwatch (D).
OPTIONS OF FUNCTIONS.
Press the Option Button to dis-
play options (sub-functions) of a primary function.
ADJUST MODE.
Enter and exit by pressing the Adjust Button
when the function that you want to adjust or reset is displayed.
Move to different functions within a display with the Function But-
ton. Adjust blinking displays with the Option Button. Reset blinking
displays with the Start/Stop Button.
SETUP AND ADJUST
ADJUST THE ALTITUDE.
In the Altitude/Time function press
the Adjust Button. The altitude digits will blink. Adjust with the Op-
tion Button up or down according to the direction of the toggling
arrow. Press the Adjust Button to exit.
CHANGE BETWEEN FEET AND METERS.
In the Altitude/
Time function press Adjust Button then press the Start/Stop Button
to switch between feet and meters. Press the Adjust Button to exit.
SET THE CLOCK.
Press Adjust Button when you are in Altitude/
Time function. Press the Function Button to go from altitude adjust
Press function and Option Buttons inward, not downward. Brace
your index finger on the contoured top of the Vertech case.
to clock set. Adjust the Clock hour with the Option Button. Move
to the minutes and seconds with the Function Button. Press the
Adjust Button to exit.
SET THE ALARM AND DATE.
Press the Adjust Button in the
Date/Alarm function to make Alarm hour blink. Set hour with the
Option Button. Go to minutes by pressing Function Button. Go to
the Date by pressing Function Button and adjust in same manner as
Clock. Exit by pressing Adjust Button.
TURN ON THE ALARM
Press Start/Stop button when the Alarm
is displayed. The alarm icon shows when alarm is on.
START AND STOP ALTITUDE ACCUMULATION.
Altitude
only accumulates when the accumulator is turned on. Press the Start/
Stop button when either Daily Vertical Feet or Total Vertical Feet is
displayed. The blinking arrow indicates accumulation is turned on.
ADJUST BAROMETER.
See “Weather” on other side. The Ba-
rometer does not change until it is adjusted.
START AND STOP TIMERS.
Press the Start/Stop Button when
the Stopwatch or Countdown Timer is displayed. The Countdown
Timer is set the same way as the Alarm. See other side for Count-
down Timer and Stopwatch details.
SLEEP.
Vertechs are shipped from the factory in sleep mode. A unit
can be returned to sleep mode if it will not be used for several months.
See “Vertical Sports Functions” on the other side for details.
ADJUST
BUTTON
START/
STOP
BUTTON
FUNCTION
BUTTON
OPTION
BUTTON
ADJUST
START
STOP
V E R T E C H
A
L T I M E T E
R
FU
NC
TION
USA
Ft
Ft
OPT
IO
N
RUNS
www.avocet.com
