manualshive.com logo in svg

Avocent DSView, Installer/User Manual, Page: 46 / 358

Share
Download
Avocent DSView Installer/User Manual Download Page 46

28

        DSView Installer/User Guide

Server certificate

A DSView software server certificate is used to:

•

Uniquely identify the DSView software server to DSView software clients connecting to the 
server using web browsers

•

Uniquely identify the DSView software server to other DSView software servers in the system 
and provide for secure transactions between them

•

Provide for secure transactions between DSView software clients and the DSView 
software server

By default, a self-signed certificate that uniquely identifies the server is created when the server is 
installed. The server certificate may be replaced with a certificate from a Certificate Authority (CA) 
using the Update DSView Server Certificate Wizard. 

Client certificates

DSView software client certificates are used for authentication of client users during log in. To use 
DSView software client certificates for authentication, a DSView software administrator must first 
enable certificate authentication. See 

Client session information

 on page 50 for more information. 

Once this option is enabled, the DSView software server will prompt the client web browser to 
send its user certificates.

The DSView software client certificate must first be loaded into the client web browser and be 
associated with a user account. See 

Changing certificates associated with users

 on page 144 for 

more information.

Managed appliance certificates

Certificates are also used for authenticating and authorizing managed appliance sessions when a 
managed appliance is added in secure mode. See 

Adding Units

 on page 81 for more information.

Using Integrated Windows Authentication

The DSView management software allows DSView software clients to authenticate against 
Microsoft Windows NT domain and Microsoft Active Directory external authentication servers 
using Integrated Windows Authentication. This feature allows Single Sign-On (SSO) and is 
disabled by default.

NOTE:

 Integrated Windows Authentication cannot be used if the DSView software server name contains 

periods (.).

To use Integrated Windows Authentication for authentication, a DSView software administrator 
must first enable it. See 

Client session information

 on page 50  for more information.

Using the software through a firewall

In a typical network configuration, as shown in Figure 1.5, the DSView software client is located 
outside of the firewall and the DSView software server and managed appliances reside inside the 
firewall. In this case, the firewall must be configured to allow two TCP/IP ports inside the firewall.

Summary of Contents for DSView







































































































































































































































































































































































Reviews:

No comments