Avocent DSView Installer/User Manual Download Page 99

Page: 99 / 358

Chapter 4: Managing Units

•

DSView Software Server - Name of the server associated with the units.

•

Location - Location assigned to the units. See

Grouping units by location

on page 127 for

more information.

•

Migration Status - Whether units from an imported DSView 2.x database or CCM appliances
using AVWorks

software require migration to be operational in the DSView management

software. See

Importing DSView 2.x software databases

on page 236 for more information.

•

Model Number - Model numbers. See

Changing Unit Properties

on page 88 for

more information.

•

Part Number - Part numbers. See

Changing Unit Properties

on page 88 for more information.

•

Primary Contact - Name of the person who is responsible for a unit. See

Specifying user phone

contact information

on page 147 for more information.

•

Primary Contact Phone - Phone number of the primary contact. See

Specifying user phone con-

tact information

on page 147 for more information.

•

Secondary Contact - Name of the person to contact if the primary contact is unavailable. See

Specifying user phone contact information

on page 147 for more information.

•

Secondary Contact Phone - Phone number of the secondary contact. See

Specifying user phone

contact information

on page 147 for more information.

•

Serial Number - Serial numbers of units. See

Changing Unit Properties

on page 88 for

more information.

•

Telnet Port - Port number used for a Telnet connection to a target device.

•

Visibility - Whether to display (Show) or not display (Hide) a unit in the Unit Views windows.

See

Using the Customize link in windows

on page 14 for more information.

Adding Units

You may add:

•

A single managed appliance

•

Multiple managed appliances based on a range of IP addresses

•

A single target device that is not attached to a managed appliance

NOTE:

A DSI5100 appliance may be attached to only one DSView software system at a time.

When a managed appliance is added, DSView software administrator, user administrator and
appliance administrator privileges are automatically assigned to the managed appliance. A user
with any of these privileges may:

•

Reboot a managed appliance

•

Administer local user accounts on the managed appliance

•

Control target device power

Summary of Contents for DSView







































































































































































































































































































































































Search results

Summary of Contents for DSView

Reviews:

Avocent DSView, Installer/User Manual, Page: 99 / 358

Search results

Summary of Contents for DSView

Reviews: