manualshive.com logo in svg

Avocent DSView, Installer/User Manual, Page: 167 / 358

Share
Download
Avocent DSView Installer/User Manual Download Page 167

 Chapter 5: Managing User Accounts        

149

Alternatively, if the user administrators group was not going to be assigned access rights to the 
DSR1021 switch, access rights could be added for only the user johnsmith.

See 

Adding User Accounts

 on page 141, 

Managing User-Defined User Groups

 on page 150 and 

Changing Unit Access Rights

 on page 91 for more information.

Customizing Appliance and Target Device Access Rights windows

By default, the Name field is always displayed in the target device Access Rights window. The 
following fields also display and may be removed by clicking the 

Customize 

link:

•

Viewer Sessions - Specifies whether the user may display KVM sessions using a Video 
Viewer window or Serial sessions using a Telnet/SSH applet window.

•

Power Control - Specifies whether the user may control the power of the target device if it is 
connected to an SPC device outlet.

•

VM Sessions - Specifies whether the user may establish virtual media sessions.

•

Reserved VM Sessions - Specifies whether the user may establish reserved virtual 
media sessions.

By default, the Name field is always displayed in the Appliance Access Rights window. The 
following fields also display and may be removed by clicking the 

Customize 

link:

•

Reboot - Specifies whether the user may reboot the DS1800 digital switch, CPS appliance, 
CCM appliance or DSR switch. See 

Rebooting

 on page 240 for more information.

•

Flash Upgrade - Specifies whether the user may Flash upgrade the DS1800 digital switch, CPS 
appliance, CCM appliance or DSR switch. See 

To update the firmware of specific appliances 

of a specific type to DSView software compatibility

 on page 465 for more information.

•

Settings - Specifies whether the user may change the appliance settings of the DS1800 digital 
switch, CPS appliance, CCM appliance or DSR switch. See 

Changing Managed Appliance 

Settings

 on page 95 for more information.

•

Local Users - Specifies whether the user may manage local accounts on the DS1800 digital 
switch, CPS appliance, CCM appliance or DSR switch. See 

Changing local account settings

 

on page 114 for more information.

See 

Using the Customize link in windows

 on page 14 for more information.

.

To display a user’s access rights to a target device:

1.

From the side navigation bar, click 

Access Rights

.

2.

From the side navigation bar, click 

Target Devices

. The target device Access Rights window 

will open

•

If a black check mark appears, the user has the right to perform the corresponding action.

•

If a grey check mark appears, a group to which the user belongs has the right to perform 
the corresponding action.

Summary of Contents for DSView







































































































































































































































































































































































Reviews:

No comments