Avocent DSView Installer/User Manual Download | Manualshive

Page: 168 / 358

background image

150

DSView Installer/User Guide

•

If no check mark appears, the indicated action may not be performed because access rights
have not been specified on the target device for the user or group to which the
user belongs.

The access rights display may contain information that appears invalid. For example, virtual
media access can be enabled to a target device that does not support it. Similarly, virtual media
access could be enabled but KVM (Video Viewer) access may be disabled. See

device access rights

on page 92 for an explanation.

3.

Click

Close

when you are finished reviewing the access rights. The User Accounts window

will appear.

To display a user’s access rights to a managed appliance:

1.

From the side navigation bar, click

Access Rights

.

2.

From the side navigation bar, click

Appliances

. The Appliance Access Rights window

will appear:

•

If a black check mark appears, the user has the right to perform the corresponding action.

•

If a grey check mark appears, a group to which the user belongs has the right to perform
the corresponding action.

•

If no check mark appears, the indicated action may not be performed because access rights
have not been specified on the managed appliance for the user or group to which the
user belongs.

3.

Click

Close

when you are finished reviewing the access rights. The User Accounts window

will appear.

Managing User-Defined User Groups

Users that have been added to the DSView software system may be added to the following two
types of user groups:

•

Built-In - The DSView management software is delivered with six predefined user groups:
Appliance Administrators, Auditors, DSView software administrators, Everyone, User
Administrators and Users. All users are automatically included in the Everyone user group
when they are added to the DSView software system. Users may be added to any of the other
user groups. The privileges that a user has to perform tasks on the DSView software system is
dependent on the built-in user group to which the user is a member.

•

User-defined - You may also define your own custom groups, based on any criteria you wish.
For example, you may want to define groups based on user administrators with read-only
access, software developers at a specific location, global network infrastructure personnel
based on job title and so on.

Built-in user groups will appear in the User Groups - Built-in window and user-defined user groups
will appear in the User Groups - User Defined window. By default, the Preemption Level column
will appear in the windows and display the preemption level of each user group. The views of the
windows may be customized by clicking the

Customize

button to display the following columns:

«
...
166
167
168
169
170
...
»

Summary of Contents for DSView







































































































































































































































































































































































Reviews:

No comments

Related manuals for DSView

Brand: Canon Pages: 82

Powershot A650 IS

Brand: Canon Pages: 49

Brand: Navitar Pages: 23

Altiware HPBX 5.0A

Brand: Altigen Pages: 490

FLASH MX 2004 - FLASH LITE AUTHORING GUIDELINES FOR THE I-MODE...

Brand: MACROMEDIA Pages: 48

Brand: Valgrind Pages: 319

CERTIFICATE 8.0 RELEASE NOTES

Brand: Red Hat Pages: 34

Brand: FujiFilm Pages: 21

Brand: FujiFilm Pages: 21

Network HotSync

Brand: 3Com Pages: 38

Brand: FieldServer Pages: 11

SANsurfer FC HBA Manager Application

Brand: Qlogic Pages: 218

DEEP FREEZER PROFESSIONAL 5

Brand: FARONICS Pages: 31

TASCAM PCM Recorder

Brand: Tascam Pages: 2

Brand: Xerox Pages: 32

Brand: TC Electronic Pages: 8

Brand: Panasonic Pages: 78

PEG-N610C gMovie v1.3

Brand: Infinity Softworks Pages: 29

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands