Avocent Cyclades ACS 6000, Installation/Administration/User Manual, Page: 33 / 90

Chapter 3: Web Manager Overview
21
5. Configure the remaining port parameters as needed.
6. Click Save .
7. Select Physical Ports from the left menu. The Physical Ports screen appears.
8. To enable and perform additional configuration on all ports at once, click the checkbox on the
top line of the ports list.
9. To enable and perform additional configuration on one or more ports at once, click the
checkbox(es) on the entry for each port.
10. Click Edit.
11. To enable the selected port(s), select Enabled from the Status menu.
12. (Optional) To change the default pinout when a Cisco cable is connected to the selected
port(s), select Cisco from the RJ-45 Pinout menu.
13. For port(s) connected to the console of a target device, leave CAS selected in the Serial Profile
menu.
14. For port(s) connected to a PDU, select Power from the Serial Profile menu.
15. For port(s) connected to a modem, select Dial-in from the Serial Profile menu.
16. To reconfigure the connections settings to match the device(s) connected to the selected
port(s), make the needed changes in the Communication Settings area of the screen.
NOTE: The administrator can also select Units - Appliance Settings - Ports - Default Settings and Units -
Appliance Settings - Ports - Physical Ports to enable and configure individual ports and perform other advanced
configuration.
17. Click Save .
To close the First Time Configuration screen:
Select Finish from the left menu on the First Time Configuration screen.