Avocent AV Works, Installer/User Manual

Page: 80 / 144

68 AVWorks Installer/User Guide
Table 6.1 indicates the types of appliance operations that may be performed in the three access levels.
To add or modify a user:
1. Click the Settings tab in the AVR AMP.
2. Select the Users category.
3. To add a new user, click the Add button. The Add User dialog box appears.
-or-
To modify a user, select a username and click the
Modify button. The Modify User dialog
box appears.
4. When adding a user, enter the username and password to assign to the user and then verify the
password by typing it in the Verify Password field.
-or-
When modifying a user, change the password, if desired.
5. Select the appropriate access level for this user from the pull-down menu. If you select the
User option, the Access Rights button appears.
a. To select individual device access for the user, click the Access Rights button. The User
Access Rights dialog box appears.
b. To add access to a device, select a device in the left (No access to) column. Click the
Add button.
c. To remove access to a device, select a device in the right (Allow access to) column. Click
the
Remove button.
d. Repeat steps b and c until the right (Allow access to) column represents the appropriate
device access for this user, and then click OK .
6. Click OK to exit the dialog box.
7. Click Apply to save any changes without exiting the AMP.
-or-
Click
OK to save any changes and exit the AMP.
Table 6.1: AVR Switch Access Levels
Operations
Appliance
Administrator User
Administrator
User
Preempt other users All Equal and lesser No
Set network and global values Yes No No
Reboot and upgrade firmware Yes No No
Manage user accounts Yes Yes No
Monitor device status Yes Yes No
Access devices Yes Yes Assigned by Admin