Avocent AV Works, Installer/User Manual

Page: 54 / 144

42 AVWorks Installer/User Guide
3. Click the radio button for the desired connection speed.
4. Click
OK .
Adjusting Mouse Options
The Video Viewer mouse options affect cursor type, scaling, alignment and resetting. Mouse
settings are device-specific; that is, they may be set differently for each device.
NOTE: If the device does not support the ability to disconnect and reconnect the mouse (almost all newer PCs
do), then the mouse will become disabled and the device will have to be rebooted.
Cursor type
The Video Viewer offers five appearance choices for the local mouse cursor. You may also choose
no cursor or the default cursor.
To change the mouse cursor setting:
1. Select Tools - Session Options from the Video Viewer menu. The Session Options dialog
box appears.
2. Click the Mouse tab.
3. Select a mouse cursor type in the Local Cursor panel.
4. Click
OK .
Scaling
You may choose among three preconfigured mouse scaling options or set your own custom scaling.
The preconfigured settings are: Default (1:1), High (2:1) or Low (1:2), as follows:
•
In a 1:1 scaling ratio, every mouse movement on the desktop window will send an equivalent
mouse movement to the server.
• In a 2:1 scaling ratio, the same mouse movement will send a 2X mouse movement.
• In a 1:2 scaling ratio, the value will be 1/2X.
To set mouse scaling:
1. Select Tools - Session Options from the Video Viewer menu. The Session Options dialog
box appears.
2. Click the Mouse tab.
3. To use one of the preconfigured settings, check the appropriate radio button.
4. To set custom scaling, click the
Custom radio button. The X and Y fields become enabled. Type
a mouse scaling value in the X and Y fields. For every mouse input, the mouse movements are
multiplied by the respective X and Y scaling factors. Valid input ranges are 0.25 to 3.00.