Quick Installation Guide
AMX
™
Switching System
The following instructions will help you
to connect your AMX switching system.
For more detailed information, please consult
your installer/user guide.
To install the AMX switch and the
AMX5130 user station
To Contact Avocent Technical Support CALL (888) 793-8763 VISIT www.avocent.com/support DOWNLOAD www.avocent.com
Avocent, the Avocent logo, AMX and The Power of Being There are trademarks or registered trademarks of Avocent Corporation. All other marks are the property of their respective owners. ©2005 Avocent Corporation. All rights reserved. 590-487-
5
01A
1
2
The Power of Being There
®
Initial setup
Place your AMX switch and AMX5130 user
station in the desired locations. Rack mounting
brackets for the AMX switch are included for
easy rack installation.
Connecting power
Power down your systems. Attach one end
of each appropriate power cord to your AMX
switch and to your AMX5130 user station. Plug
the other end of each cord into an appropriate
AC wall outlet.
Connecting to the LAN
Insert one end of a UTP cable attached to your
LAN into the network port on the back of the
AMX switch.
Connecting the AMX5130 user station
to the AMX switch
Insert one end of a UTP cable attached to the
user station into a numbered user port on the
AMX switch for each user in your system.
Connecting the AMX switch to a server
Insert one end of a UTP cable into one of the
numbered server ports on the switch, and fas-
ten the opposite end into the RJ-45 port on an
AMIQDM (dual port/multimedia) module. Plug the
AMIQDM module connectors into the appropriately
labeled ports on your server for each computer to be
connected to your AMX switch.
3
4
AMX Switch
AMX5130
User Station
1
Connecting power
to the switch
2
Connecting
to a LAN
3
Connecting the
user station
4
Connecting the
switch to servers
AMIQDM
Module
Serial
Port
1
Connecting power to
the user station
AMIQDM
Module
NOTE:
AMIQDM-PS2, AMIQDM-USB and
AMIQDM-VSN modules are available.
