RFSoC Development Kit Getting Started Guide
Page 4
Objectives
This tutorial is intended to help you:
Gain familiarity with the Avnet RFSoC Development Kit with Qorvo RF Front End
Use the Avnet RFSoC Explorer GUI to control the hardware, generate and acquire signals into
MATLAB through the RF signal chains of the Qorvo card
Explore the Avnet RFSoC Explorer user API for automated scripting and interface to MATLAB
Requirements
Laptop or PC with the following software installed:
MATLAB R2019b (
Free MATLAB Trial Package for Wireless Communications
i
o
DSP System Toolbox
o
Fixed-Point Designer
o
Communications Toolbox
o
Communications Toolbox Support Package for Xilinx Zynq-Based Radio
o
Signal Processing Toolbox
o
LTE Toolbox (optional)
o
5G Toolbox (optional)
Avnet Zynq Ult RFSoC Development Kit with Qorvo RF Front End
USB cable (Type A to Micro-USB Type B)
CAT5 Ethernet cable
Xilinx Vivado software is
not required.
