Page 33
Qorvo 1800MHz Small Cell RF Card Hardware User’s Guide
Hardware User’s Guide
6 Regulatory and Compliance Information
The Qorvo card can radiate radio frequency energy and has not been tested for CE, FCC, or IC compliance.
The intended use is for demonstration, engineering development, or evaluation purposes.
There are no constraints on operating temperature range, beyond thermal relief experimentation.
No environmental requirements such as moisture sensitivity, shock and vibration are relevant.
REGULATORY COMPLIANCE INFORMATION
FCC WARNING
This kit is designed to allow:
(1) Product developers to evaluate electronic components, circuitry, or software associated
with the kit to determine whether to incorporate such items in a finished product and
(2) Software developers to write software applications for use with the end product.
This kit is not a finished product and when assembled may not be resold or otherwise marketed
unless all required FCC equipment authorizations are first obtained. Operation is subject to the
condition that this product not cause harmful interference to licensed radio stations and that
this product accept harmful interference. Use of the kit should be limited to a development lab
environment only.
CE WARNING
This evaluation kit is for use by professionals for their research and development purposes. The kit may not be
put into service for use on a regular basis, or integrated into an end product (Annex I.4 of the RED). This kit is does
not bear the CE mark of certification. As such, this kit may be operated only within the requirements of RED
section 1.6.2.5, Custom-built evaluation kits.
