Avnet AT&T IoT Starter Kit, Getting Started Manual

Page: 13 / 32

Page 13
Create Online Accounts
To implement the out-of-box example, the following is required:
a) Accounts need to be set-up on four websites
b) An AT&T SIM card needs to be activated
This is tabled below and step-by-step details provided in the paragraphs that follow:
Account Name / Website URL Purpose
http://cloudconnectkits.org Avnet support forums, project files and documentation
https://marketplace.att.com/quickstart AT&T account registration, SIM activation, Flow, etc access
https://www.pubnub.com Real-time data streaming service from AT&T to dashboard
https://freeboard.io Browser-based dashboard visualization of measurement data
Register Cloudconnectkits.org Account (Avnet)
13. Navigate to http://cloudconnectkits.org
14.
Press the Sign In/Register button. A drop-down appears from which you can create an account.
15.
When asked for Serial Kit Numbe r, use the WNC Serial Number (S/N) as shown below.
16.
Once registered, you are logged in and a confirmation email is sent to your email address.
17. Select the AT&T IoT Starter Kit (LTE-M, STM32L4) webpage for access to this
kit’s design
documentation, bill of materials, reference designs and other information.
http://cloudconnectkits.org/product/att-stm32-iot-starter-kit
Register an AT&T Account and Activate the AT&T SIM
18. Navigate to https://marketplace.att.com/quickstart
19. Click-on Login then Signup (top right corner of webpage)
20. Complete the AT&T IoT Platform Account Signup form then click the Create Account button
21. Once logged-into your new account, select Management > Register SIMs from the menu at the
top of the webpage
22. Type-in
the SIM Card’s
ICCID (20 digit number printed on the SIM card) into the form and provide
a descriptive nickname for this SIM
23. Click the Register SIMs button
(150 MB data and 150 SMS messages has now been allocated to the Starter SIM account)
Clone the AT&T Flow Designer Project
Before proceeding with setup of a PubNub account, it is recommended to complete the initial setup of the
AT&T Flow project that will be needed for the reference design.
Flow is a GUI-based IoT development tool based on NodeJS. It allows for data input and output along
with user defined rules (for additional information on Flow, see
https://flow.att.com/start )
Flow can be located via drop-down menu from your AT&T IoT Platform account,
or
accessed directly using https://flow.att.io