Page 11
5 Ultra96-V2 Basic Setup and Operation
The functionality of the Ultra96-V2 is determined by the application booted from the non-volatile
memory – by default the microSD Card. This
Getting Started Guide
allows system developers to
exercise and demonstrate multiple circuits through PetaLinux, including:
•
SSH Terminal Access
•
GPIO LEDs
•
Wi-Fi
In addition to the items included in the kit, you will also need the following to complete the
exercises in this tutorial.
•
Ultra96 USB-to-JTAG/UART Pod (required for terminal access)
or
•
Monitor (requires connection to miniDP port), keyboard, mouse
An Ultra96-V2 image in its expected out-of-box configuration is shown below along with various
topology components highlighted.
Figure 3 – Ultra96-V2 Topology
Summary of Contents for AES-ULTRA96-V2-G
Page 10: ...Page 10 Figure 2 Ultra96 V2 Block Diagram ...
Page 26: ...Page 26 Figure 23 Connected to Ultra96 V2 Via External Wi Fi ...
Page 29: ...Page 29 Figure 28 Telemetry from PMIC 0x13 43 Figure 29 Telemetry from MPSoC Sysmon ...
Page 42: ...Page 42 7 Create or select your Host ID Click Next Figure 41 Select Host Information ...