Avnet 78368 User Manual Download Page 68

Page: 68 / 87

MSC SM2S-IMX8MINI

68 / 87

User Manual

7.2.4 Generate images

7.2.4.1

Choosing an MSC-LDK image

The MSC-LDK provides different images for the sms2-imx8mmini module. The following table lists all currently available images, their contents and
sizes.

Table 26: Available images

dtb

approx size

comment

msc-image-base

612MiB

A small Wayland GUI image with full target device hardware support.

Contains MSC features/tools.

msc-image-qt5

2,3GiB

A Wayland GUI image with full target device hardware support.

Contains Qt5/Qml, gstreamer, opencv, and MSC features/tools.

7.2.4.2

Building an Image with MSC-LDK

The MSC-LDK build uses the:

./build.sh bitbake <component>

command, where

<component> can be:

•

image name (e.g.

msc-image-qt5, etc.)

•

package name (e.g. u-boot-imx, linux-imx, memtester, etc.)

Summary of Contents for 78368
























































































Search results

Summary of Contents for 78368

Reviews:

Related manuals for 78368

Brands by name

Popular brands

Avnet 78368, User Manual

Search results

Summary of Contents for 78368

Reviews:

Related manuals for 78368

Brands by name

Popular brands