AvMap Geosat 2C, User Manual

Page: 10 / 17

30
SYSTEM SETUP
In MENU “General” you can enter the following data:
♦
Colour theme
♦
Automatic Brightness
Using a light sensor mounted on the rear panel the unit automatically change the
brightness level of the screen.
♦
Voice instructions: Detailed/Simplifyied
♦
Beeper: On/Off
♦
Regional settings
♦
Factory defaults
In MENU “Map” you can enter the following data:
♦
Map Details (Simple, Normal, Full)
♦
Type of the symbol used to display your position
♦
Scale Format (Bar, level, width)
♦
Automatic Info: to receive automatically the information of the object on the
cursor position
♦
Auto Position: Manual/Auto Zoom/Autocenter
♦
Map Orientation: to orient the map on the screen
In MENU “POI” you can select the point of Interests you would like to display on the
map while navigating.
Points of Interest are locations of commercial, recreation landmarks or services
that are preloaded in Geosat
2C
. These range from restaurants, parks, petrol sta-
tions to hospitals and police stations. The purpose of the POI database is to
provide you a list of destinations that you might be interested in going to. They
are very useful when travelling in an unfamiliar city that is why Geosat
2C
contains
1,5 million Points of Interest for the whole Europe.
In MENU “Routing” you can enter the following data:
♦
Route Preference: to choose the kind of track to be planned
♦
Avoid: factors to plan the route
♦
Off Route Recalculation: when you don’t follow the way suggested by the navigator
♦
Route Draw Mode: to choose to display the track in the background or fore-
ground.
In MENU “Track” you can enter all the settings regarding the way of recording/
displaying of the track.
In MENU “Alarms” you can enter a speed limit and a speed alarm when you exceed
it. You can also enter a Mark alarm informing you when you reach a Mark. Moreover
you can set a GPS fix lost alarm.
In MENU “Date &Time” you can enter all the settings of time and date and also
activate "Elapsed Timer" and/or "Countdown".
In MENU “Units” you can set the units of measurements.
In MENU “Language” you can set the Language text and/or voice.
In MENU “Simulator” you can enter all the settings of the simulation mode. If your
route is already planned and you set Simulation mode to Route you will see your
simulated position as if you were really driving on that route at the selected speed.
User Manual