AvMap GeoPilot II, Quick Manual

Page: 7 / 12

Vertical Navigation, Wind and Fuel consumption. In addition, clock functions and trip
data can be found in this menu.
Checklist
Provides a checklist of standard procedures for Engine Start, Ground Check, Pre-
Take-off, Cruise in Flight and Landing.
Simulator
The built-in Simulator function allows you to become proficient in the use of the
GeoPilot before ever taking it into the cockpit. No current position fix is required
because the GeoPilot simulates position data internally. The GeoPilot simulates flight
in two ways: a straight flight path or following a selected route.
Communication
The Communications Menu contains options that control the GPS data output.
1.2.3 System Setup Menu
The System Setup Menu allows the user
to change how the GeoPilot2 displays
information.
Press MENU 3 times to display the Main
Menu. From the System Setup you can
select the following options :
General Setup
The General Setup sub-menu controls
the general GeoPilot settings like sound,
scale,
language, etc.
Fix Setup
The Fix Setup sub-menu contains options relating to GPS data input and display.
Alarm Setup
The GeoPilot2 provides alarm settings for various functions. Here you can set the
system for your navigational requirements.
Track Setup
Track is the actual course traveled, which the GeoPilot2 can display as a series of
connected dots. The interval setting and the color can be defined in this section by the
pilot.