AvMap EngiBOX, User And Installation Manual

Page: 17 / 32

User and Installation Manual -
17
AvMap EngiBOX
4.1.3 Alarms
Warning limit: the black background for each value turns yellow when the parameter is
approaching the warning limit.
Alarm limit: the black background for each value turns red when the alarm limit is exceeded.
Alarm Reminder ! : Once an alarm has been activated, an exclamation mark appears next
to the parameter abbreviation and remains there even when the parameter goes back to the
normal value.
This mark is a useful reminder, in facts, in case you have not noticed the alarm, you can
always see the exclamation mark at the end of your flight next to the parameter abbreviation.
Go to Settings and open the Alarms page to check date and time of the alarm activation
(Chapter 5). The exclamation mark will remain on the display till you clear the alarms in the
Alarms page.
4.2 Graphs
Graphs are available for performance analysis
of the last 20 minutes for each engine parameter.
To change parameter, press the knob: the arrow
icon in the top left corner becomes orange, and
you can now rotate the knob to cycle among the
parameter.
Press again the knob to go back and continue
cycling among the pages.