AVM OVATION MP 6.3, Operating Instructions Manual

Page: 7 / 30

7
16
Analogue output left (XLR)
17 Analogue output right (XLR)
18 Analogue output right (Cinch/RCA)
19 Analogue output left (Cinch/RCA)
20 Digital output optical
21 Digital output coaxial
22 USB B digital input
23 Digital input optical 2
24 Digital input optical 1
25 Digital input coaxial 2
26 Digital input coaxial 1
27 Digital input AES/EBU
28 WiFi antenna socket
29 USB A digital input for storage media
30 Reset button
31 Network port (LAN)
32 Status LED
33 Update button (Streaming module)
34 Mains connector
35 Mains switch
36 Trigger outputs
37 Connector for external IR receiver
38 Phase LED
39 Link
40 Configuration port (updates)
1.3 Installation and cooling
During normal operation, the device only generates a manageable amount of heat. If the unit is
placed in a cabinet, please ensure sufficient air circulation. If you place other components
above or below the device, please ensure a minimum distance of 1 cm. We also recommend a
location that is protected from direct sunlight so that you can easily read the indications on the
display of the device (9). Avoid placing the device in the direct vicinity of a heater or in areas
with extremely high humidity. When setting up the unit, also make sure that there is a free area
of at least 15 cm in front of the CD slot (8), so that CDs can be inserted and ejected without
hindrance.
1.4 Connection to mains
Connect the unit to the mains outlet (34) by using the power cord which is (in some countries)
delivered together with the unit. Make sure that mains voltage is according to the value printed
on the rear panel of the amp (near mains connector).
CAUTION:
Keep the unit switched off (35) until all audio connections are made.