AVM OVATION MP 6.2, Operating Instructions Manual

Page: 15 / 32

15
2.4.3 CD playback
If a disc is inside playing is started by pressing the
PLAY
button (12). If you press
PAUSE
(11)
the unit will go into the pause mode until PLAY (12) or STOP (10) is pressed.
The actual state (
PLAY , PAUSE , STOP ) is shown on the display (8). Furthermore, the display
shows the actual playing time, the actual title number and the total number of titles.
2.4.4 SKIP / SEARCH
Using the
SKIP
buttons (13, 14) you can easily access any title on the disc. When you press
one of the
SKIP
buttons for longer than a second while the unit is playing, it begins to play in
fast forward or reverse mode (
SEARCH
).
While the player is stopped, the SKIP buttons (13, 14) can be used to select a title. A short tip
switches to the next / previous title. Holding one of the buttons down scans automatically up
/ down. The number of the actual title is shown in the display (
TRACK ).
2.4.5 Repeat
Press the
REPEAT button (6) once to repeat the actual title, twice to repeat the whole CD or
the programmed sequence. A third pressing returns to the normal playing mode. The repeat
state is displayed in the upper line of the display (
RP ONE / RP ALL ).
2.4.6 Programing an individual playlist
If a disc is inside the player you can program your individual playing sequence as follows.
Press the
PROG button (4) to enter the playlist menu. Pressing STOP (10) exits the menu and
the unit will return to normal mode. Pressing
PAUSE
(11) generates a random playlist.
Pressing
PLAY (12) leads you to the programming menu:
The display shows on the left side the actual title (
TRCK ), below the playing time of this title
( TIME ). Pressing the Option keys (2,3) selects a title.
Pressing
PLAY (12) adds the selected title to the playlist. The display shows on the right side
the number of programmed titles (PGM-QTY xx ). Below the playing time of the programmed
list ( P-TIME xx).
The button
PROG (4) stores the playlist, if you want to exit without storing, press STOP (10).
2.4.7 Programming an individual playlist (example)
The CD inside the player contains 15 titles. You want to play only titles 7, 3 and 8.