AVM OVATION CD 6.2, Operating Instructions Manual

Page: 15 / 19

15
3 Advanced Settings
3.1 Personal Setup
The personal setup offers a range of settings to individualize the CD 6.2 according to your
personal needs. To enter the
personal setup
menu, please switch off your device on the rear
of the unit at the mains switch (29). Keep the
PROG
button pressed (4) while you switch on
the unit again (29). As soon as the display shows the personal setup menu you can release
the PROG button (4).
When the personal setup is active you can select the desired function using the option keys
(2, 3). Use the
SKIP buttons (13, 14) to apply changes to a selected function. EXIT exits the
personal setup and stores the settings.
Depending on the currently selected sound source the personal setup menu offers a range of
selected settings described in the following.
3.1.1 Set volume control
Gain fix
If the
gain fix
option is activated, the signal of the selected sound source will be played back
with a fixed volume level. This setting is particularly useful when the CD 6.2 is part of a
surround sound setup where a separate surround decoder is used for bass and multi-channel
management. If a surround system is connected to the CD 6.2, specific settings such as
channel balance, tone settings and bass management are controlled by a separate decoder.
These settings may not be altered by other components in order to maintain the balance of all
channels. For this application, the CD 6.2 offers the
gain fix function by passing through the
signal with a fixed gain setting.
Gain variable
If the
gain varibale
option is activated, the volume level of the selected sound source can be
adjusted with the option keys (2, 3) on the front-side of the unit (see 2.6).
3.1.2 set display brightness
Sets display brightness 25% to 100%.
NOTE : The setting 100% can lead to "burn in" effects on the display if the unit is operated in
this setting for a very long time. In order to avoid such "burn in effects" please switch the unit
to stand by, if not in use.