Getti ng star ted
4
OVATION A 6.3 / 8.3
Abb. 4. Pin assignment of 3,5 mm jack output for external
trigger signals (17)
Fig. 5. Pin assignment of 3,5 mm jack input for external
infrared receiver (12)
1.4 Installation and cooling
The unit can become hot depending on demanded output
power or environmental temperature. Therefore, it is import-
ant, that the cooling air can flow unhindered into the air inlet
in the bottom and flow out through the holes in the rear panel.
Direct exposure to sunlight is not recommended because this
will heat up the unit.
a) Ground (GND)
b) Trigger signal (+5V)
c) Masse (GND)
d) IR-Signal
e) +5V
