manualshive.com logo in svg

AVM INSPIRATION C8, Operating Instructions Manual

Share
Download
AVM INSPIRATION C8 Operating Instructions Manual Download Page 13

13

3.6 CD player

The basic functions of the CD player can be accessed by the buttons right under the display (4 – 8). For
more sophisticated functions see chapter 4.

3.6.1 Insert / eject

Insert a CD

The C8 / C9 have a slot-in CD drive. Insert the CD (coverside up) and push slightly. The drive will now
automatically draw the disc inside. After that the player reads the TOC and shows it on the display. Most left
is the number of the actual track followed by the total number of tracks on the CD (for example "1/17"). The
middle f the display shows the total playing time of the CD.

NOTE:

 If there is still a CD inside or the unit is in stand by, the slot will be blocked. If the inserted disc is not

readable (DVD, data-CD) the display will show "no playable disc"

Eject CD

Press the button (7) under the display (3). Then the disc will be ejected.

Auto-CD function

If CD is not selected as source he unit will automatically change to CD from any other input after you have
inserted a CD.

3.6.2 PLAY, PAUSE, STOP

While the player is stopped the buttons 

 or 

 (4, 5) select the title. A short tip switches to the next /

previous title. Holding the button down scans automatically up / down. The number of the actual title is
shown in the display.

Pressing 

 (8) starts the player. While playing the button changes it’s function to 

 (pause).

While the player is playing the button (7) under the display shows the STOP-symbol. When the player is
stopped this button changes it’s function to EJECT-symbol.

3.6.3 SKIP / SEARCH

While the player is stopped the buttons 

 or 

 (4, 5) select the title. A short tip switches to the next /

previous title. Holding the button down scans automatically up / down. The number of the actual title is
shown in the display.

While the player is playing a short tip on the buttons 

 or 

 (4, 5) selects the previous / next title. Holding

down the buttons starts the rewind / fast forward function. Rewind / fast forward stops automatically when the
begin / end of the actual title is reached.

Summary of Contents for INSPIRATION C8






















Reviews:

No comments

Brands by name

Popular brands

Load more brands