FRITZ!Box Fon WLAN 7113
38
Call Waiting
Call Waiting
Call waiting can be switched on or off for each extension.
Some older terminal equipment connected to extensions
may misinterpret the call waiting signal. This is especially
true of fax machines and modems. If communication er-
rors occur, you should disable call waiting for fax and mo-
dem extensions.
See section “Waiting Calls” on page 44 for information
about how to accept a call while another connection is ac-
tive.
Suppress caller ID for Outgoing Calls (CLIR)
The CLIR (Calling Line Identification Restriction) function
prevents your telephone number being displayed on the
other party's phone during outgoing calls.
The CLIR function is disabled in the factory settings. You
have the option of enabling this function permanently and
then disabling it again. CLIR can also be used for individu-
When Call Waiting is enabled, modem and fax connec-
tions may be interrupted.
Enable Call Waiting
N
Pick up the handset.
r2
<Ext.>
s0s
Dial the sequence shown at left.
r91ss
Save your settings if desired by dialing the
sequence shown at left.
O
Hang up the handset.
Disable Call Waiting
N
Pick up the handset.
r2
<Ext.>
s1s
Dial the sequence shown at left.
r91ss
Save your settings if desired by dialing the
sequence shown at left.
O
Hang up the handset.
