AVM FRITZ!Box 6320 Cable Installation, Configuration And Operation Download Page 15

Page: 15 / 145

Connecting to Electrical Power

Pick up the power supply unit included in the FRITZ!Box
package.

Connect the FRITZ!Box to the power supply unit. Insert
the small plug into the power socket at the right edge of
the socket strip on the FRITZ!Box.

Plug the other end into an AC power outlet.

The “Power / Cable” LED lights up after a few minutes to sig-
nal that the FRITZ!Box is ready for operation on the cable con-
nection.

Use only this power supply unit for connecting to electri-
cal power.

FBoxCable-6320-2-e.fm Seite 15 Freitag, 27. Mai 2011 3:21 15

Summary of Contents for FRITZ!Box 6320 Cable


















































































































































Search results

Summary of Contents for FRITZ!Box 6320 Cable

Reviews:

Related manuals for FRITZ!Box 6320 Cable

Brands by name

Popular brands

AVM FRITZ!Box 6320 Cable, Installation, Configuration And Operation

Search results

Summary of Contents for FRITZ!Box 6320 Cable

Reviews:

Related manuals for FRITZ!Box 6320 Cable

Brands by name

Popular brands