AVM AVM RS232 Manual Download Page 130

Page: 130 / 148

MZP RS232 Programmers Manual Mic/Line Messages (Class 11)

130

MZP RS232 Programmers Manual Mic/Line Messages (Class 11)

Message Details

Class 11: Mic/Line Card Messages

The mic/line card is an optional accessory for all Intelix Matrix products that extends and simplifies

the connection of audio sources. The 8-channel mic/line card includes a preamplifier for each channel which

boosts microphone level inputs to the level optimum for use by the matrix. Each channel has four user

selectable input ranges, and is capable of reporting both the current input range and the signal level at each

of the eight channels. The RS232 messages in this class allow the user to set up, manipulate and query the

mic/line card in a wide range of ways.

Included in the parameters available on the mic/line card are:

1) Eight channel preamplifiers, with four ranges: line, aux, mic, and

manual. The range for each channel may be both set and read.

2) Each channel has both signal present and peak indicators. These indicators are visible

LEDs.

3) Each channel has independent phantom power (+15V), which can be selected or

disabled in software.

4) The update rate of the signal level meter is user selectable.

Summary of Contents for AVM RS232





















































































































































Search results

Summary of Contents for AVM RS232

Reviews:

Related manuals for AVM RS232

Brands by name

Popular brands

AVM AVM RS232, Manual

Search results

Summary of Contents for AVM RS232

Reviews:

Related manuals for AVM RS232

Brands by name

Popular brands