Latest products and information available at www.avlite.com
8
AV-FL-DC
Universal DC Helipad Floodlight
LED Floodlight Unit Adjustment
By using the tilt mechanism each individual LED Floodlight Units can be precisely adjusted. For that
the user has to use the following steps:
• Loosen the two nut screws at the back of the LED Floodlight Unit (please refer to Figure 3)
• Adjust the Light Head as required by turning the Tilt Screw Nut. A spring between the LED
Floodlight Unit and the Light Head will provide the required tension
• After the adjustment secure the tilt / position of the Light Head by tighten the Locking Screw Nut
LED Floodlight Unit
Light Head
Tilt mechanism
Tilt s
crew
/
lock
ing s
rew
Frangible Sleeve (76mm)
Pivo
t po
int
Concrete block and in-ground bolds
Recommended size: 40cm x 40cm)
Mount Base
SIDE VIEW
Ground
Tilt mechanism
Frangible Sleeve (76mm)
Concrete block and in-ground bolds
Recommended size: 40cm x 40cm)
Light head
Cable gland
Piv
ot p
oin
t
LED Floodlight Unit
REAR VIEW
Tilt scr
ew / Lock
ing scr
ew
Figure 3. Tilt mechanism
