manualshive.com logo in svg

Avlite AV-BSBL, Quick Start Manual

Share
Download
Avlite AV-BSBL Quick Start Manual Download Page 4

Head Office

+61 (0)3 5977 6128

Avlite USA

+1 (603) 737 1311

Avlite Asia

+65 9119 8770

General Enquiries

[email protected]

Step 14: Connect AC Long Lines and Optional 

Solar

a.  Connect the AC long lines to the AC Input on the 

Battery Box. 

 

Note: Please proceed to Step b for optional solar 

panel installation instructions.

b.  Connect the Solar Panel cables to the Solar Panel 

inputs on the Battery Box.

Step 13: Connect to Battery Box

a.  Connect Barrette PCU power cables to the Battery 

Box.

b.  Refer to MALSR Cable Layout diagram in the 

Approach Lighting Installation & Service Manual 

for direction on which barrettes connect to the 

Battery Box and which barrettes connect to the next 

barrette in line. 

From Barrettes

Solar Panels

AC Power

Summary of Contents for AV-BSBL

Page 1: ...omponents Lay all the parts on the ground in preparation for assembly Step 2 Open Barrette Latch a Lift the handle of the butterfly latch to unlock b Unfold the Barrette Step 3 Straighten the Barrette a Straighten the barrette until it is fully extended b Secure the two latches Folding Barrette U Bolt Ground Stake Mounting Cap Double Loop Line with Cam Clip Single Loop Line Step 4 Install Mounting...

Page 2: ... 8 Set Up Tie Down Stakes a Insert tie down stake into the ground approximately 6 7 feet from one of the stanchions on the front side of the Barrette b Use a mallet to pound a stake securely into the ground c Repeat steps from the back side of the Barrette d Repeat steps on the opposite side Threaded Flange Frangible Coupling Support Leg Step 7 Set Up Barrette a Flip entire Barrette assembly over ...

Page 3: ...around top of the tie down stake c Pull the line until the loop is taut around stake d Clip the carabiner of the cam clip to the other end of the loop Step 11 Feed the Line into Cam Clip a Pull the line from the stanchion to the ground stake located directly in front of the stanchion b Take the cam clip from the ground stake tie down assembly and feed the tail end of the line into the cam locking ...

Page 4: ...or optional solar panel installation instructions b Connect the Solar Panel cables to the Solar Panel inputs on the Battery Box Step 13 Connect to Battery Box a Connect Barrette PCU power cables to the Battery Box b Refer to MALSR Cable Layout diagram in the Approach Lighting Installation Service Manual for direction on which barrettes connect to the Battery Box and which barrettes connect to the ...

Reviews:

No comments

Brands by name

Popular brands

Load more brands