For the full manual, visit the link below:
avlite.com/product/barrette-steady-burning-light-av-bsbl/
Quick Start Guide
AV-BSBL
Thank you for purchasing this product.
This guide will
provide you with a brief summary of the steps involved in
deploying the Folding Steady Burning Barrette with tie-down
installation.
Your system will consist of:
1 x Folding Steady Burning Barrette, 2 x Stanchions (or Support Pole),
2 x 2 in. Stainless Couplings, 2 x Mounting Caps, 8 x Ground Stakes, 4 x 12 ft. Line (Single Loop),
4 x 14 in. Line (Double Loop), 4 x Cam Clips
Required Tools:
Mallet (User Supplied)
Step 1: Gather All Components
Lay all the parts on the ground in preparation for
assembly.
Step 2: Open Barrette Latch
a.
Lift the handle of the butterfly latch to unlock.
b. Unfold the Barrette.
Step 3: Straighten the Barrette
a. Straighten the barrette until it is fully extended.
b. Secure the two latches.
Folding Barrette
U-Bolt
Ground Stake
Mounting Cap
Double Loop Line
with Cam Clip
Single
Loop Line
Step 4: Install Mounting Cap
a.
Slide two U-bolts onto barrette between the first
and second light head.
b. Flip barrette over.
c.
With flat side down, align the mounting cap
holes with the U-bolt. Ensure the arrow on
mounting cap is pointing towards the lights.
d.
Place (4) flat washers over U-bolts and thread (4)
hex nuts until fingertight.
e. Thread coupling onto mounting cap.
f. Repeat on other end.
U-Bolt
Mounting Cap
Coupling
