
Latest products and information available at www.avlite.com
15
AV-426-L861
Radio Controlled Solar Aviation Light
b. Operation Mode
Using the [UP and [DOWN] keys select from the following:
[Always On]
[Dusk till Dawn]
[Standby]
Press [SEND] after selection
c. Advanced Operation Mode
(if Advanced Operation Mode is enabled during Radio Control
System Programming - Section 1)
Using the [UP and [DOWN] keys select from the following:
[Visible LEDS]
[IR/NVG LEDS]
Press [SEND] after selection
d. Light Group
Using the [UP and [DOWN] keys select from the following:
[0-15]
(Select any one of the 0-15 light groups)
Press [SEND] after selection
e. Intensity
Using the [UP and [DOWN] keys select from the following
[Low]
[Medium]
[High]
Press [SEND] after selection
f. Flash Code
(if Flash Code is enabled during Radio Control System Programming - Section 1)
Using the [UP and [DOWN] keys select from the following
[000 to 1FF]
A full list of available flash codes is available from Avlite
Press [SEND] after selection
g. Sync Offset
(if Synchronisation is enabled during Radio Control System Programming -
Section 1)
Note:
Sync offsets can be set using an absolute value or a percentage (Flash Delay) of the
flash sequence or a combination or both. If you select Sync Offset value and also Sync delay
value, the combination offset/delay value will be the combined total off both values.
Using the [UP and [DOWN] keys select from the following:
[-10.23 to +10.23] seconds
Press [SEND] after selection
h. Sync Delay
(if Synchronisation is enabled during Radio Control System Programming -
Section 1)
Using the [UP and [DOWN] keys select from the following
[0 to 99.6%]
Press [SEND] after selection