Latest products and information available at www.avlite.com
11
AV-425-RF
Radio Controlled Solar Aviation Light
Timeout Duration
This menu is only visible when the timeout Mode is enabled. This menu is used to select the timeout
duration, the time before the LED intensity reverts back to its LOW intensity state. The timeout duration
can be set from 1 minute to 60 minutes.
Diagnostic
This feature can be used to check the battery voltage in every light in the airfield. The command can be
sent any time and it will not affect the current state of the light. If the light is in STANDBY mode the light
will flash as shown below and revert to STANDBY mode after the diagnostic has been completed. For
addional diagnostic information please see Section 3 of the ‘Radio Control System Setup’ section of this
manual.
EXTERNAL POWER Diagnostic
Checks for external power connection
NODE (MAIN NET) Diagnostic
Checks which lights are nodes in the main network
NODE (SUB NET) Diagnostic
Checks which lights are nodes in the sub network
BATTERY (HEALTHY) Diagnostic
Battery above 12.5V
BATTERY (LOW) Diagnostic
Battery above 10.5V, but below 12.5V
BATTERY (FLAT) Diagnostic
Battery below 10.5V
Radio Encryption
The AV-425-RF is fitted with 128bit Radio Encryption. This includes user-adjustable encryption keys and
12 user-adjustable channel settings.
Synchronization
The integrated mesh network radio system can provide true synchronization flash patterns including flare
paths and approach sequences.
Sending Commands
Every time the SEND button is pressed a command is sent containing all the current settings in the Radio
Controller.
The SEND button can be used after changing one setting or after changing multiple settings.
(1 x 1 second flash)
(2 x 300 milli second flashes)
