YX Matrix Switching System
—
User Manual
23
Step 1
: Make sure you have selected “Video” and “Audio” by checking the boxes to the left.
Step 2:
First select the “Output”number keys 02, 03 and 05 to the right, and select the
“Input” number key 01 to the bottom. Afterwards, press consecutively the previously selected
“Output” number keys 02, 03 and 05 (or you can press the “Deselect all output” key). This way,
you have selected “Input” 01 and “Output” 02, 03 and 05 switching.
Step 3:
First select the “Output” number key 06 to the right, and select the “Input” number
key 03 to the bottom. Afterwards, press the previously selected “Output” number key 06 (or you
can press the “Deselect all output” key). This way, you have selected Input 03 and Output 06
switching.
Upon completion of the above 3 steps, you have actually completed the switching operation of
having Audio/Video channel 1 to Output channels 2, 3 and 5 while at the same time successfully
switched from Audio/Video channel 3 to Output channel 6.
Example 2:
Now, there is a YX-3088 matrix with the input/output ports properly connected to
the equipment. It is required to set the input/output connectors to switching from video channel 1
to output channels NO.1, 6 and 7 and also to switch from audio channel 2 to output channel 8.
There are two ways of operations:
First Way:
Step 1:
Make sure you have selected “Video” and not “AUDIO”. Directly click on the icons
on the matrix corresponding to the INPUT number key 01 and the OUTPUT number keys
01
、
06
、
07
to turn into
，
you have then selected video switching of input 01 and
output 01,06,07.
Step 2:
Make sure you have selected “AUDIO” and not “Video”. Directly click on the matrix
icons corresponding to INPUT number key 02 and OUTPUT number key 08
to turn
them into
，
you have then selected audio switching of input 02 and output 08.
Upon completion of the above 2 steps, you have successfully switched video channel 1 to
output channels 1, 6 and 7 and also switched audio channel 2 to output channel 8.
Second Way:
Step 1:
Make sure you have selected “Video” and not “AUDIO”.
Step 2:
Select the output number keys 01,06 and 07 to the right and input number key 01to the
bottom. Afterwards, press consecutively the previously pressed output number keys 01,06 and 07
to the right (or you can press the Deselect all output key). This way, you have selected video
switching of input 01 to output 01,06 and 07.
Step 3:
Make sure you have selected “AUDIO”and not “Video”.
Step 4:
Select output number key 08 to the right and input number key 02 to the bottom.
Afterwards, press again the previously-pressed output number key to the right
（
or you can
