WVGA-RS Operation
A. General Mode:
The LED shines after the power is on and all buttons have no function except the select button.
B. Adjust Mode:
In general mode, push select button to entry EQ/GAIN adjust mode. When finish the adjust
mode, push select button again to entry RGB SKEW adjust mode. Push one more select
button, you can quit the adjust mode and will save the adjusted data, go into the general
mode.
EQ/GAIN adjust mode: (RGB SKEW function can not work)
1. Push select button and the LED extinguishment, will entry the EQ/GAIN adjust mode.
2. Push EQ up/down button to increase or decrease the signal compensation, when push two
buttons at the same time, the signal compensation will go back to zero.
3. Push GAIN up/down button to increase or decrease the brightness, when push two buttons
at the same time, the brightness will go back to zero.
RGB SKEW adjust mode: (EQ/GAIN function can not work)
1. Push select button and the LED shines, will entry the RGB SKEW adjust mode.
2. Push R SKEW up/down button to increase or decrease the delay time, when push two
buttons at the same time, the delay time is zero.
3. Push G SKEW up/down button to increase or decrease the delay time, when push two
buttons at the same time, the delay time is zero.
4. Push B SKEW up/down button to increase or decrease the delay time, when push two
buttons at the same time, the delay time is zero.
5. Push select button after you adjusted, the LED shines means you can quit the adjust mode
and will save the adjusted data, go into the general mode.
