Installation
1. Turn off the PC and monitors.
2. Connect the HD-15 video extension cable between the
PC and the “Video In” port of Distribution Amplifier.
3. Connect the HD-15 video extension cables between
the monitors and the “Video Out” ports of Distribution
Amplifier.
4. Connect the power adapter and turn on the
Distribution Amplifier.
5. Turn on the PC and monitors.
Note:
If you install the DDC monitor for the Distribution
Amplifier, the rest of monitors must be the same
resolution as the DDC monitor.
Available monitors include the VGA, SVGA, XGA,
QXGA, UXGA, Multisync, and exclude the CGA, EGA,
Mono.
Operation for cascade:
1. The function to display identical image on more
monitors, you request to attach another Distribution
Amplifier.
2. Connect the HD-15 male/male video extension cable
between the “Video Out 1” port of the former
Distribution Amplifier and the “Video In” port of the
latter Distribution Amplifier.
Note:
Even though you are allowed to cascade the Distribution
Amplifier with varied ports, the image might become
unstable if cascade too many tiers of Distribution
Amplifier.
-3-
P.S.: The example cascades the 4 and 8 ports
Distribution Amplifier; however, you can cascade the
Video Distribution Amplifier with demanded port.
© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or registered
trademarks belonging to their respective companies.
-4-
