S E AM L E SS HDBAS E T M AT RIX S W IT CHE R – HX - 2 344Z
27
B. DIP Switcher Pin 2:
IR mapping configurations
ON: IR mapping (remote => local) by channel route, remote user can control the
selected local DVD player by IR.
OFF: IR mapping (local and remote) fixed.
Right DIP Switcher:
A. DIP Switcher Pin 1 to 5:
Switch to down (ON) is specified for
“0”
, on the other hand
to up (OFF) is specified for
“1”
. For Device ID settings refer to
6.7.7 Device ID Settings
錯誤
!
找不到參照來源。
.
B. DIP Switcher Pin 6:
Mater/Slave
Enable/Disable. Only one Matrix Switcher can be
connected to other device and control PC via RS-232/LAN that is specified as Master,
others are specified as Slave.
ON: RS-485 Serial Master and RS-232 / LAN Enable.
OFF: RS-485 Serial Slave and RS-232 / LAN Disable.
C. DIP Switcher Pin 7:
Switch between RS-232 port and LAN port connection.
ON: RS-232
OFF: LAN
D. DIP Switcher Pin 8:
Reset the web server IP address to
192.168.0.3
The steps are as below:
1. Please adjust the Pin8 to ON
and re-start the Matrix Switcher.
2. After the Matrix Switcher re-starts about 10 seconds, shut down it.
3. For a normal operation, please adjust the Pin8 to OFF, then power on the Matrix
Switcher again. The IP address will be restored to the default value:
192.168.0.3
6.7.6 DIP Switcher for 2 Pins
Figure 6-18 DIP Switcher for HD-BaseT Setting
A. Pin 1:
Local F/W upgrade.
B. Pin 2:
Normal.
C. Pin 3:
Normal.
