-3-
(Optional) IR Receiver Cable
Install
Put it into the HX-1542W “IR IN” port and place the IR
Receiver Cable, so that you can point to it easily with your
IR remote controller.
RS-232 Control
Connect the RS-232 cable between the PC and the
“RS-232” port of HX-1542W.
Key in the command you can change source to output
Command List:
“route 1 1“ OUT1
IN1
“route 1 2“ OUT1
IN2
“route 1 3“ OUT1
IN3
“route 1 4“ OUT1
IN4
“route 2 1“ OUT2
IN1
“route 2 2“ OUT2
IN2
“route 2 3“ OUT2
IN3
“route 2 4“ OUT2
IN4
“Help” Display command List
-4-
Additional Option
Select any additional options you may require.
1. IR Receiver Cable
Technical Specifications Output Signal
Pin #
Signal
Pin #
Signal
1
TMDS Data 2+
11
TMDS Clock Shield
2
TMDS Data 2 Shield
12
TMDS Clock -
3
TMDS Data 2-
13
CEC
4
TMDS Data 1+
14
Reserved
(N.C. on device)
5
TMDS Data 1 Shield
15
SCL
6
TMDS Data 1-
16
SDA
7
TMDS Data 0+
17
DDC/CEC Ground
8
TMDS Data 0 Shield
18
+5 Power
9
TMDS Data 0-
19
Hot Plug Detect
10
TMDS Clock+
© AV LINK GROUP LTD., All rights reserved.
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or registered
trademarks belonging to their respective companies.
-5-