HDBaseT HDMI Distribution Amplifier - HS Series
21
CHAPTER 7 TROUBLESHOOTING
1. What to do if LED is fail in display?
Answer:
Check the connection of power cord is not loosening and the power cord is in a
good status having no any damage. Check the power source is normally.
2. What to do if you sense the power leakage during plugging or unplugging of the
input/output ports?
Answer:
It could be that the equipment power is not properly grounded. You must
properly ground your equipment;; otherwise product life can easily be
shortened.
3. What to do if operation and function failure occurred?
Answer:
Check if the equipment and the splitter or D.A system are in proper connection.
If the problem persists, send the product to the maintenance center for repair.
4. How to avoid the equipment failure due to the high temperature?
Answer:
Place the equipment in a ventilate location. If it is still not to be improved,
please check with the build-in fan whether is damaged. Or contact your
agency for helping.
5. What to do if IR function failure occurred?
Answer:
Check the battery of remote controller is NOT running low and the IR connector
is not loosening. Check whether the remote controller is aiming at the IR
receiver accurately.
Summary of Contents for HS-E P Series
Page 15: ...HDBaseT HDMI Distribution Amplifier HS Series 15 Figure 6 3 Output Connections ...
Page 24: ...HDBaseT HDMI Distribution Amplifier HS Series 24 6 Final the update is finished as below ...
Page 26: ...HDBaseT HDMI Distribution Amplifier HS Series 26 4 Final the update is finished as below ...
