Installation
1. Connect the H3S-01W video input HDMI connector with
HDMI cable from different video equipment.
2. Connect the BNC extension cable between the monitor
and the “3G-SDI Out” port of H3S-01W.
3. Connect the power cord and turn on the H3S-01W.
4. Turn on the HDMI video source device.
Support Vedio Mode
Analog
Resolution
Frequency(Hz)
525i(NTSC)
1440x480
59.94
625i(PAL)
1440x576
50
720p
1280x720
50/59.94/60
1080i
1920x1080
50/59.94/60
1080p
1920x1080
23.98/24/25/29.97/30
1080p
1920x1080
50/59.94/60
DIP Switch Settings
1 OFF HDMI AUDIO OFF
ON HDMI AUDIO ON
2 OFF GROUP 1-2,1-8CH
ON GROUP 3-4,9-16CH
OFF,OFF Group1, 1-2 CH_Group3, 9-10 CH
OFF,ON Group1, 3-4 CH_Group3, 11-12 CH
ON ,OFF Group2, 5-6 CH_Group4, 13-14 CH
3,4
ON ,ON
Group2, 7-8 CH_Group4, 15-16 CH
5 Reserved
*Note1.
Only transmits 2 channel audio from HDMI to SDI at once,
even with multi-channel HDMI PCM audio.
© C&C TECHNIC TAIWAN CO., LTD. All rights reserved.
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or
registered trademarks belonging to their respective
companies.
-3-