tracking, tap backward button once.
Note:
1.
When one headphone is connected to the device, the effective range of the
Bluetooth is 10 meters. When two headphones are connected to the device, the
effective range of the Bluetooth between two headphones is 5 meters.
2.
The headphone will be turned automatically when a 3.5mm audio cable inserted
into the headphone while the Bluetooth is connected.
3.
The paring statues will last for 5 minutes.
4.
The headphone will be turned off automatically if no device connected within 10
minutes.
Active Noise Cancelling Mode:
• Adjust the volume on the headphones.
• To power ON the noise cancelling function, set the ON/OFF switch to ON position.
The Noise Cancelling LED indicator will light up in green.
Note: After you turn ON the power, you might hear a slight hissing noise. This is a
normal function and will cease after a few seconds.
• When the batteries are running low, the Noise Cancelling LED indicator will
become dim.
• Once the battery is fully drained, the active noise cancelling feature will turn off
but the audio signal from the music player will continue to transmit.
• In quiet environments where noise cancellation is not required, the BNC50 can also
be used like conventional headphones, without the use of batteries.
• When not in use, switch OFF the POWER to extend battery life.
External audio resource play
Connect the external audio sources with the RIGHT AUX jack on the headphone by
3.5mm audio cable.
External 3.5mm microphone
To add a external microphone, connect the included 3.5mm microphone with the
LEFT AUX jacket on the headphone. The external microphone will have priority over
