100.571UK
Play/pause
Each earbud has a multi-function click button which is located on the outside surface of the earbud (see above diagram). To play or pause the current
track, press the button on either earbud firmly once.
Increase/decrease volume
To increase the master volume, press the multi-function click button on the right earbud twice and to decrease the master volume repeat the procedure
on the left earbud.
Next track/previous track
To move to the next music track, press the multi-function click button on the right earbud three times and to move to the previous track repeat the
procedure on the left earbud.
Voice
assistant
To activate your device
’
s in-built voice assistant (Siri, Alexa etc), press and hold one of the multi-function click buttons for around 3 seconds then
release. You will hear the message
“
Voice dial
”
prompting you to give your voice command. You can then ask anything you want the device to do, such
as tell you the weather, move to the next track, play a specific track or album or even find your way home using maps.
NOTE
: This function is only
available on compatible Apple and Android devices, check your device
’
s handbook for more information.
Turning the earbuds on and off (auto and manual)
To turn the earbuds off whilst they are connected to your device, simply remove them from your ears and return to the correct ports in the charging
case. To turn the earbuds on again, simply remove them from the charging case and they will switch on and automatically pair with the last connected
device, providing it
’
s within range and Bluetooth is turned on. It
’
s also possible to manually switch the earbuds on and off without inserting them in the
charging case. To turn off, simply press and hold one of the multi-function click buttons until you hear the voice message
“
power off
”
then release. To
turn on, press and hold the multi-function click button on both earbuds until you hear the voice message
“
power on
”
then release.
Hands-free operation
When you receive a phone call during audio playback, a voice assistant will tell you the number of the incoming call. To accept the call, press the multi-
function click button on either earbud once. To reject the call, press and hold the button on either earbud for around 3 seconds then release. When you
have completed the call, hang up by pressing the button on either earbud once.
Charging the earbuds
To charge the earbuds, carefully place them in the corresponding magnetic ports of the charging case so that the LED indicators on the case light blue
and the earbuds red. When charging is complete, the LED indicators will go out. It usually takes around 1 hour t
o fully charge the earbuds from ‘flat’
.
When the power on the earbuds is getting low you will hear a voice prompt
“
low battery please charge
”
, at this point return them to the charging case
to avoid them going flat.
The charging case
The charging case is a compact, magnetic carry case and power bank, with capacity to fully recharge the earbuds up to 4 times. To charge the case,
connect it to a compatible USB power socket using the charging cable provided. When charging, the LED indicator on the front of the charging case will
flash red and when fully charged, it will light constant red.
NOTE
: It
’
s important to always keep the case charged to avoid the issue of losing the
‘
auto
power on and off
’
functions of your earbuds.
Resetting the earbuds
On occasion, your earbuds may enter a locked state and need resetting. To do this, press and hold the multi-function click button on both earbuds for
around 8 seconds until you see alternating red and blue flashing lights, which then go out. Turn the earbuds on again by pressing the multi-function
click button on both and they should then repair and connect to your smart device. Sometimes the earbuds will fail to reconnect with your smart device.
If this occurs, please remove them from the device list, turn them off by replacing in the charging case and repeat the
“
Pairing in True Wireless
mode
”
procedure as described above.
FAQ
Q)
The Bluetooth earphones will not pair with my device.
A)
Check that the earphones are in pairing mode; Bluetooth is enabled on your device; and
the device is set as ‘discoverable’.
Q)
The Bluetooth earphones disconnect with my device within the stated 10m transmission distance.
A)
The maximum transmission distance stated is
dependent on a clear line of sight between the earphones and your device. If there are large metallic objects or other devices transmitting radio or
wireless signals in the vicinity, they may impact on the reception of the earphones.
Q)
The Bluetooth earphones won
’
t reconnect with my device.
A)
On occasion, your Bluetooth device or the earphones may enter a locked state and
need resetting. To do this follow the instructions for
“
resetting the earbuds
”
,
above.
Safety Disclaimer
Do not attempt to service this product yourself as opening or removing covers may result in fire, electric shock or equipment damage and will also
invalidate the warranty. This product is only designed for indoor use and must be kept away from water and high humidity along with high temperatures
and direct sunlight. Prolonged listening at high volumes can cause hearing damage. Keep away from young children as small parts can be a choking
hazard.
This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2019. AVSL Group Ltd.