AvLab PCMCIA 1S, Quick Installation Manual

Page: 5 / 8

5
10. Check Automatic search a better driver[Recommended] ,
click Next , then click Finish .
11. Select Elan-Serial Port: CF332 -DEV0 , then click Properites.
12. Click Reinstall Driver , check Automatic search a better
drive[Recommended] , click Next , then click Finish.
13. Remove the driver CD, then restart your system
to complete driver installation.
Windows 2000 Driver Installation
For PCMCIA 1S Adapter:
1. After hardware installation is completed, boot up your system.
2. At the Found New Hardware Wizard , click Next.
3. Insert the driver CD into you CD-ROM drive, then click Next .
4. Check CD-ROM drives , then click Next, Next, then click Finish .
5. Remove the driver CD and restart Windows system
to complete driver installation.
For PCMCIA 2S Adapter:
1. After hardware installation is completed, boot up your system.
2. At the Found New Hardware Wizard , click Cancel, Cancel.
3. Insert the driver CD into your CD-ROM drive.
4. Double click Serialsetup from driver CD of 2S folder.
5. When Serial Card Drivers-InstallShield wizard appears,
click Next, Install.
6. If the message window displays Windows 2K/XP Hotfix setup … ,
please ignore the message and click OK .
7. At the InstallShield wizard, click Finish .
8. When Serial Card Drivers Installer Information appears,
click Yes to restart your system.