Weaving with the Compu-Dobby 5
Compu-Dobby 5 User’s Manual
Page | 26
Resume a weaving session
2)
The loom will begin a self-test. At the same time, the button will
have a checkmark and the Power light on the interface will turn
briefly yellow, then red.
3)
Once the loom has completed its self-test, you will be able to
commence weaving.
R
ESUME A WEAVING SESSION
1)
Connect to the loom as described previously. The software defaults
to the File tab. For complete information on the Files tab, including
how to import files, see page 38.
2)
Click the file that was last being used to resume the session.
3)
Click Open for Weaving.
Summary of Contents for Compu-Dobby 5
